INOVAXION LUFO Manuel D'utilisation page 9

GENERAL VIEW OF THE PRODUCT
2
1
3
GETTING STARTED
A/C POWER ADAPTER
The power adapter plug is located under the base.
To connect the power adapter :
1. Lift the base vertically from top.
2. Make sure to insert correctly the plug until the end of the port so that it does not exceed.
3. Connect the power adapter plug in the DC port.
4. Put back the base.
5. Connect the other extremity of the power adapter in a mural catch (220 Volts).
- 14 -
4
5 6 7
HOW TO LEVITATE YOUR UFO?
• Place the magnetic base on a flat level surface. If it's not horizontal, the levitating system can't work.
• Plug the AC Adaptor into the Cosmic Base. Plug the other side of AC Adaptor into an outlet.
• Take the shade with 2 hands by the bottom side (North Pole upward) and approach it to the center
• Go down slowly the shade without forcing to find the «magnetic point». You will feel the system «takes» the
magnet by making small side movements.
• Leave the floating element in levitation.
• If during 10 to 15 seconds the system failed, wait 5 minutes and try again.
Let yourself be guided by the light ! Indeed, once the levitating globe will be turn on, you will know if it's
correctly positioned.
- 15 -