3. Press the Start Button again to stop the
operation when you finish grating.
4. The Storage Box Lid can also be used to
cover the bottom of the Cheese Holder.
CLEANING AND STORAGE
1. All parts, except the Main Body and the Shaft, are completely water and
dishwasher safe.
2. Clean the Main Body and Shaft by using a damp cloth. Never immerse the Main
Body, and the Shaft in water or any liquid.
3. Cheese Pusher and Spring Assembly can be removed from the Main Body for
cleaning. First pull the Cheese Pusher out
from the Main Body, then pull the Spring
Assembly out from the Main Body. (Fig. 12)
4. For safety, remove Blade from Cheese
Holder and store inside the Storage Box.
5. All parts can be stored inside a refrigerator
but not a freezer.
6. Store the unit out of reach of children.
7. Always remove batteries when storing the
unit for long periods of time.
NOTE: Do not use abrasive materials for
cleaning.
8. Do not disassemble Spring Assemblies.
Dimension: 170 x 80 x 80 mm
Storage Temperature: 4ºC to 40ºC
Battery: 4 x AA (LR6) alkaline batteries
Disposal
The packaging material can be recycled. Please dispose of it in an
Environmentally friendly manner and take it to a recycling centre.
If you wish to dispose of this equipment at any point, please also do so in an
environmentally friendly manner. It should not be disposed of alongside general
household waste. Instead, please take it to recycling point for electrical goods. Your
local council will be able to advise you further.
Batteries should not be thrown away in household waste. Please ensure that you always dispose of
batteries and rechargeable batteries only when they are empty. Your local council will be able to
advise you further.
Exclusive importer France-Benelux countries
Siguret Concept
33 Rue Traversière
92100 Boulogne-Billancourt FRANCE
www.siguretconcept.fr
+33 1 3 70 80 66
Technical Specifications
12
© 2011 Daka Research Inc.
All rights reserved.
www.one-touch.fr
Patented and Patent Pending
Printed in China
fig.11
fig.12