Globalstar Sat-Fi2 Guide De Démarrage Rapide page 5

SAT-FI2 AT A GLANCE
iOS APP HOME SCREEN
4
5
1
2
3
1. Current GPS Location Battery
2. Sat-Fi2 Connected Users Satellite Strength
3. Application Menu Registered
4. Logout Button S.O.S. Initiated
5. Status Bar
DEVICE OVERVIEW
1. Power LED 5. S.O.S. Button
2. Satellite LED 6. USB Power/Data Port
3. S.O.S. LED 7. External Power Port
4. Power Button
ANDROID APP HOME SCREEN
4
5
1
2
3
1. Current GPS Location Battery
2. Sat-Fi2 Connected Users Satellite Strength
3. Application Menu Registered
4. Logout Button S.O.S. Initiated
5. Menu Button
1 2 3
4
5
7
LED STATUS
POWERING ON
POWERING OFF
OPERATIONAL/STATUS
POWERED ON
POWERED OFF
BATTERY FULL
BATTERY CHARGING ON
BATTERY CHARGING OFF
BATTERY <25%
CONNECTED TO
SATELLITE
NOT CONNECTED
TO SATELLITE
S.O.S. CONNECTING
MODE
S.O.S. ESTABLISHED
MODE
CANCEL S.O.S. MODE
HIBERNATION MODE
Press the Power button to turn the Sat-Fi2 on. The
POWER BUTTON
LEDs will light up notifying you that the device is on.
Press and hold the S.O.S. button until the S.O.S. LED
S.O.S. BUTTON
turns green to initiate an S.O.S. with GEOS IERCC.
USB DATA PORT
Connect the USB Data Cable to a computer to update the firmware on the Sat-Fi2.
HIBERNATION MODE:
As a default setting, the Sat-Fi2 will go into hibernation mode after 15 minutes of inactivity. The hibernation timer can be configured
from the settings menu in the app or web console.
When the Sat-Fi2 is in hibernation mode, the power LED performs a dimming blink in orange and green colors. To wake up the
6
Sat-Fi2 from hibernation mode, access the app and a notification will be displayed showing the Sat-Fi2 is waking up from hibernation.
You will also see the green lights scrolling through the Sat-Fi2 LED's. Additionally, pressing the power button for 3 seconds will start the
power off sequence.
NOTE: To initiate S.O.S. while in hibernation mode, press and hold down the S.O.S. button until the LED's start flashing. This will wake
up the device and initiate S.O.S. once a connection has been established.
POWER LED SATELLITE LED
All Green LEDs Blink in Forward/Reverse Direction until Sat-Fi2 Powers On
Fast Blink Orange Fast Blink Orange
Normal Blink Green N/A
No LED No LED
Solid Green N/A
Double Blink Green N/A
Slow Blink Green N/A
Fast Blink Red N/A
N/A Normal Blink Green
N/A Normal Blink Red
N/A N/A
N/A N/A
N/A N/A
Green + Orange
No LED
(Bright/Dims/Off)
Press and hold the Power button down until all the LED's
start flashing orange. The device will then power off.
While S.O.S. is active, press and hold the S.O.S.
button until the S.O.S. LED turns red to cancel the
S.O.S. with GEOS IERCC.
S.O.S. LED
Fast Blink Orange
N/A
No LED
N/A
N/A
N/A
N/A
N/A
N/A
Solid Green
Normal Blink Green
Normal Blink Red
No LED