Askoll eSpro 45 Mode D'emploi page 252

BATTERIES AND RECHARGE
Place battery and charger on a stable surface.
First, connect the charger cable to the battery
socket under the spring flap. A "click" shows correct
introduction.
Then connect the charger to the mains.
Select desired recharge mode, as shown in "BATTERY
CHARGER".
Once charging has finished, place battery and charger
in their compartment as follows:
First place the charger on the vehicle and connect the
cable with connector to the vehicle socket.
42
eSpro45_eSpro70_Rev_2_EN.indb 42 eSpro45_eSpro70_Rev_2_EN.indb 42 14/07/2020 14:41:42 14/07/2020 14:41:42