Publicité
Les langues disponibles
Les langues disponibles
EN
User Manual
Power strips with surge protection
1
Safety Instructions
1.1
General
•
Read the user manual completely and carefully before use.
It is part of the product and contains important information for correct use.
•
Keep this user manual.
It must be available for uncertainties and passing the product.
•
Do not open the housing.
•
Voltage-free only with pulled plug.
•
Only let a trained electrical engineer do installation, disassembling, main-
tenace and repairing work.
•
Compare the specifications of product, power supply and peripherals.
These must be identical.
•
Do not repair defective products by yourself, but contact the dealer or
producer.
•
Do not modify or alter product nor accessories.
•
Avoid stresses such as heat and cold, moisture and direct sunlight, vibra-
tion and mechanical pressure.
•
Only use in dry ambience.
•
Nicht hintereinanderstecken.
•
Do not cover the product.
•
Do not plug in a row.
•
The overvoltage protection is active when the surge protection indicator
is on.
•
Do not operate in an explosive environment.
•
Secure packaging, small parts and insulation against accidental use.
•
Risk of injury by stumbling and falling
1.2
Warning levels
Warnings against hazards that may result in injuries in case
of non-observance.
Warnings against hazards that may result in material
damage in case of non-observance.
2
Description and Function
2.1
Description
Your product is a power strip with extension cable for home use. It comes with an
overvoltage protection and a power switch with operation indicator and has a shock-
resistant housing, child protection and a cable management system.
2.2
Scope of delivery
Power strip, user manual
2.3
Operating elements and parts
Fig. 3: Operating elements and parts
impact-resistant casing with model-dependent mounting option
Cable Management System
Safety power outlets with child protection
Surge protection indicator „SURGE PROTECTION"
RESET switch for the overvoltage protection
ON / OFF switch
Power cord with model-dependent length
3
Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4
Preparing
•
Compare the specifications of product, power supply and
peripherals. These must be identical.
•
Check the scope of delivery for completeness and integrity.
5
Connecting
Fig. 4: Connecting
1.
Connect your household devices to the power strip.
2.
Connect the power strip to a good accessible safety power
socket.
3.
Switch the power switch to "I".
4.
Disconnect all cable connections after use or switch the
power switch to "O".
REV2016-05-18
V1.0
6
Operating
There are no operating elements to operate during use.
7
Protection circuits
If the surge protection indicator is off despite the input voltage is present, proceed as
follows:
1.
Remove the power strip from the mains socket.
2.
Remove the cause of the fault.
3.
Reactivate the surge protection by pressing „PRESS TO
RESET".
4.
Plug the power strip into the mains socket.
5.
Turn the power switch to „I".
Although not shining, there is no voltage applied by the mains connection
or the integrated temperature protection has been activated. In this case,
the power strip must be replaced.
8
Specifications
Housing
Input voltage
Max. allowable load
Overvoltage protection
Power cord length
Power cord type
Tab. 2: Specifications
9
Maintenance and Cleaning
The products are maintenance-free.
Material damage
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
•
Keep and use the original packaging for transport.
10
Liability notice
We reserve the right to printing errors and changes to product, packaging
or product documentation.
•
See our terms of warranty. These are available in their current
form under the given contact details.
11
Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
12
EU Declaration of Conformity
Goobay
With the CE sign,
GmbH ensures, that the product is conformed to the basic European
standards and directives.
- 2 -
Aluminium or plastics
250 V~ 50 Hz
16 A, 3500 W
Uc 250 V~; TYP 3
Uoc 3 kV (L-N, L/N-PE)
Up 1,8 kV (L-N,L/N-PE)
1.4 / 3 m
H05VV-F 3G 1.5 mm²
®
, a registered trademark of the Wentronic
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
Goobay
®
Publicité
