Introduction - TEC B-480-QP Série Mode D'emploi

1. INTRODUCTION

1. INTRODUCTION
Thank you for choosing the TEC B-480 series thermal/transfer printer. This high performance printer is
equipped with superior hardware including the specially developed (12 dots/mm, 304.8 dots/inch) near
edge print head which will allow very clear print at a maximum speed of 203.2 mm/sec. (8 inches/sec.).
The media supply is internal. Optional features include an automatic ribbon saver, a built-in rewinder/strip
mechanism and external media supply.
This manual contains general set-up and maintenance information and should be read carefully to help
gain maximum performance and life from your printer. For most queries please refer to this manual and
keep it safe for future reference.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
CAUTION
To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover.
CAUTION
Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn into the
moving parts, push the switch in the "OFF" position to stop movement.
E1-1
ENGLISH VERSION EO1-33007
1. INTRODUCTION