2
2.
Putting into operation/use
2.1 Setting the operation time/operating state
– +
2.2 Operation for the user
Key in stairwell
Press 1x, approx. 1 sec. =
Press 1x, approx. 3 sec. =
If the key is pressed again for approx. 1 sec. during this period, you switch off the lighting immediately.
Only for units with OFF prewarning.
Approx. 20 seconds before the end of the set time, the lighting is switched off for a very.
brief time. The user can switch ON the lighting again with any key in the stairwell.
The lighting is again activated for the set operating time.
The operating time is displayed during setting.
Key +
0
;
1 ... 99
5
Key –
99
; 99 ... 0
5
Hand switch, light continuously ON
Key
Function: Continuous/ON Display:
Function: Set time
for the operation time
for one hour
minutes
5
minutes
5
Display:
when the unit is activated
when the unit is not activated
GB