Livington Go Fan Mode D'emploi page 3

WARNINGS:
• Do not remove the battery from the Livington Go Fan. The battery
should not be charged with any charger other than that intended for
the Livington Go Fan. Do not use any other battery than the one fitted
into the device, as this could damage it.
• Never place the Livington Go Fan near open flames or heating
appliances.
• This appliance may be used by children over 8 years of age, by persons
with restricted physical, sensory or mental capabilities, or by persons
with a lack of experience or knowledge, only if they are supervised
or have been given instructions on how to use the device safely and
understand all related dangers and issues arising therefrom.
CHARGING THE BATTERY:
1. Plug the charging cable into the USB port of your computer, a suitable power bank or a USB adapter.
2. Then plug the other end of the charging cable into the micro-USB port located on the rear of the Livington Go Fan.
The powerful lithium-ion battery ensures operation for up to 6 hours.
OPERATION:
• You can clamp or set up the Livington Go Fan wherever a breeze of fresh air is required.
• The built-in rotation technology enables an action radius of 360°.
• Simply turn the rotary control on the back of the Livington Go Fan and set the desired power.
Note: The running time of your Livington Go Fan can vary and is dependent on the type of use and power setting.
TECHNICAL DATA:
Lithium-ion battery 18650 - 3,7 V ⎓ 2000 mAh
Supply voltage: 5 V - 9 V • Power 2 - 4 W
Speed 3800 + 10% RPM • Cable: 80CM USB
EN
3