Norditalia Calor Standard Manuel D'utilisation page 10

ATTENTION:
Indicates possible hazards to the device or other items.
PLEASE NOTE:
Highlights tips and information for you.
Operation
The product should preferably be used on the following regions of the body:
shoulders, arms, legs, calves, stomach.
ATTENTION:
Do not cover the step switch. This can lead to malfunctions.
Electrical connection
• Ensure that the device voltage (see label) and the mains voltage are the same.
• Insert the plug into a properly installed socket.
Switching on
• Move the step switch on the controller to the desired setting.
• The indicator light will illuminate to show that the device is in operation.
PLEASE NOTE:
Unusual smells may occur during the first use. These are harmless and will cease over the course
of operation.
Step switch
You can choose the following settings:
Settings function
0 Off
1 Low. Light heat.
2 Medium
3 High
PLEASE NOTE:
You can identify the setting using the indicator light.
Switching off
• Set the step switch to 0 (off).
• Only then pull the plug out of the wall socket.
Auto Off Function
• The heating pad is fitted with an automatic shutdown system. After 90 minutes performance time
the red LED will start blinking, indicating that the appliance has turned itself off.
• To turn the appliance back on, turn the control unit to the "0" position (off) for at least 15 seconds
and then re-select the required temperature.
WARNING:
• Pull the plug out of the socket before each time you clean the device.
• Only clean the device when it is cool. Risk of burns!
10
OPERATING INSTRUCTIONS
CLEANING