SPIKES-SPIDER ALPINE Instructions De Service page 11

1
1 Detach the locking disc by pulling out the red security bar in the middle and turning the disc
to the left or right until the locking disc may be removed easily.
2
Pull down the SPIKES-SPIDER from the upper part of the tire.
3
The SPIKES-SPIDER will slide of the wheel while one chain segment is still under the wheel.
4
Move your vehicle forward or backward to release the chain and the SPIKES-SPIDER is aside
of your tire. Fold up the SPIKES-SPIDER and put it into your trunk.
5
Put on the hub cover with the box wrench and the torsion bar carefully.
2 3
Removal
4
5
english