Publicité
Les langues disponibles
Les langues disponibles
UK
Safety Tips
Whilst all care has been taken to remove sharp edges, care must be taken when cleaning or handling the
table to prevent risk of injury from exposed metal edges.
Do not overload the table causing it to bend.
Product Description
•
CB905 - 1200 x 600 x 900 Stainless Steel Folding Table
•
CB906 - 1800 x 600 x 900 Stainless Steel Folding Table
Assembly
Note: Be sure to check all packaging materials for any small parts that may have come
loose during transportation
Remove all protective film, taking care to avoid scratching the surfaces
1.
Place the table facedown on the floor [A].
2.
Raise the legs with the shorter struts first, followed by the legs on the opposite side [B & C].
3.
Slide the joint locks over the joints. Ensure they are securely in place to prevent the legs from
4.
collapsing [D & E].
Stand the table upright and ensure all screws and nylock nuts are securely tightened [F].
5.
Remove all protective film, taking care to avoid scratching the surfaces.
6.
Note: Adjust the feet if necessary to level the table.
Before using for the first time VOGUE recommend the table is cleaned thoroughly with a suitable
7.
cleaning agent. Remove all cleaning residues and dry thoroughly.
Cleaning
•
Clean the table regularly using a cleaning agent suitable for use with stainless steel.
•
Always remove cleaning agent residue. This can discolour the table surfaces.
•
Never leave the table surface damp as this can cause discolouration.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of VOGUE.
Every effort is made to ensure all details are correct at the time of going to press, however, VOGUE reserve the
1
Telephone Helpline: 0845 146 2887 (United Kingdom)
right to change specifications without notice.
Publicité
