Hema 80.06.0019 Mode D'emploi page 21

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

OPERATION
1. Plug the power cord into a suitable socket.
2. Press button "POWER" to start the fan. The fan will begin to
work under low speed and the LED light of "LOW" will be
on.
3. Press button "SPEED" to choose your desired speed "LOW
→ MED → HIGH → LOW ..." The corresponding LED light
will be on.
4. Press button "TIMER" to choose your desired working time
"0.5 h → 1 h → 1.5 h → 2 h → 2.5 h → 3 h → 3.5 h → 4 h →
4.5 h → 5 h → 5.5 h → 6 h → 6.5 h → 7 h → 7.5 h → no
timer → 0.5 h ... ("h" stands for "hour")". The
corresponding LED lights will be on.
5. If you wish to activate oscillation function, please press
button "OSC". Press the button again, the oscillation
function will be deactivated. Oscillation angle: 0-70°
6. After use, press button "POWER" to turn off the appliance and then unplug it.
NOTE: This unit has a remote control. One piece of CR2025 battery is to be installed. The functions of the
remote control buttons are the same as of the buttons on the control panel.
CARE AND CLEANING
CAUTION: ALWAYS UNPLUG THE PRODUCT FROM THE ELECTRICAL OUTLET PRIOR TO CLEANING IT.
1.
Do not use the product in oily or dirty areas, as the air vents may become blocked.
2.
Clean the plastic parts with a mild soap and a damp cloth or sponge.
3.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it
down with a damp cloth and then dry it carefully. Always take out the mains plug first.
4.
Periodically check the screws on the product to ensure they are securely tightened.
5.
Store the product in a cool, dry place.
RECYCLING
This product bears the selective sorting symbol for waste electrical and electronic equipment
(WEEE).
This means that this product must be handled pursuant to European Directive 2012/19/EU in
order to be recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the
environment and human heath due to the presence of hazardous substances.
Never throw empty batteries away, but deposit them in special battery boxes or hand them in as domestic
chemical waste at your municipal depot.
QUALITY
Safety and quality is very important to HEMA. We have our own laboratory, which assesses all equipment in
terms of electrical safety and ease of use, before it is included in our range. HEMA also monitors the product
quality in collaboration with the manufacturer.
- 20 -

Publicité

Table des Matières
loading

Table des Matières