FF Europe DSTL01 Mode D'emploi page 12

1. Choose a location that is free of electrical wiring or other obstructions, and make sure that
the fi xing surface is sturdy enough to hold the hose reel.
2. Position the mounting bracket against the surface where the bracket is to be fi xed. Mark the
hole locations for screwing the expansion bolts on the surface. It is advised to fi x the hose
reel at least 1 m away from the fl oor.
3. Drill holes on the marked locations and ensure that the holes fi t the expansion bolts. The
holes should be 51 mm deep with a diameter of 11 mm.
4. Fix the mounting bracket to the wall with the provided expansion bolts.
5. Check that the hose extends and retracts smoothly.
DE FR EN ES EN
INSTALLATION
12