Westfalia Wetelux 95 14 08 Mode D'emploi Original page 6

Intended Use
The LED plant grow light is intended to support
the growth of plants. It is not suitable for
Illumination.
Assembling and Setting up
Mount the LED light strips in a suitable place as
desired.
Connect the power supply to a suitable wall
socket and the plant light to the power supply.
Press the on / off button repeatedly (4) to switch
the plant light on and off. With button (1) you
can adjust the brightness of the LEDs, with
button (2) you can switch the red or blue LEDs on
or off separately. With the button (3) you can set
the timer to 3, 6 or 12 hours. The selected time is
displayed.
Cleaning

Wipe the housing of the device with a lightly moistened cloth. Use detergent
as needed. Do not immerse the device in water or any other liquid.
 Do not clean the device with aggressive chemicals or abrasives in order not
to damage the surfaces.
Technical Data
Radiation angle:
Average service life:
Operating voltage:
LEDs:
PPFD:
Dimensions:
Power Adaptor:
Input:
Output:
Operation
120°
30.000 h
12 V , 24 W
99 pcs. red 25 lm, 455 K, 3,2 V
33 pcs. blue 25 lm, 455 K, 3,2 V
2
75 μmol/m s at 30 cm
40 cm Length of the Strips
100-240 V~, 50/&= Hz; 0,6 A
12 V , 3 A
6
1
2
3
4