Dimensional Drawing; Application Notes; Instruments Admissions - Gossen MetraWatt SINEAX G 536 Mode D'emploi

8. Dimensional drawing

112.5
114.1
Fig. 7. Housing P13/70 clipped onto a top hat rail (35 × 15 mm or
35 × 7.5 mm, acc. to EN 50 022).

9. Application notes

Current connection in phase
Voltage connection
between:
Vector diagrams
Current connection in phase
Voltage connection
between:
Vector diagrams

10. Instruments admissions

Germanischer Lloyd
Type approval certificate: 12 261-98 HH
CSA approved for USA and Canada
file-nr. 204767
14
10 11 12 13
1 2 3 4 5 6 7 8 9
70
L1 L2
L1 & L2 L2 & L3
L1 L1 L1 L1
L3 L3 L2 L2 L3 L3 L2 L2
L3 L1
L1 & L2 L2 & L3
L1 L1 L1 L1
L3 L3 L2 L2 L3 L3 L2 L2
L3 L1
L3 & L1 L1 & L3
L1 L1 L1 L1
L3 L3 L2 L2 L3 L3 L2 L2
L2 L
L3 & L1 L & N
L1 L1
I U
L3 L3 L2 L2
FCC Compliance and Canadian DOC Statement
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to both part
15 of the FCC Rules and the radio interference regulations
of the Canadian Department of Communications: These
limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is like to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
L2 L3
L2 & L1 L3 & L2
L1 L1 L1 L1
L3 L3 L2 L2 L3 L3 L2 L2