Power Supply - NASA WSP1300 Manuel D'utilisation

AC ADAPTOR OF THE WHEATHER STATION
- Use the supplied AC adapter or an adapter with the required characteristics respecting the
current regulations: DC 5V
- Use the adapter indoors only, in rooms protected from moisture.
- Connect the AC adapter to the AC adapter terminal (27) on the back of the unit.
- Then connect the adapter to the mains.
INSTALLING THE BATTERIES (CLOCK BACKUP) (batteries not included)
- Remove the batteries compartment cover (26).
- Insert 2 x 1,5V LR03 (AAA) batteries, respecting the polarity indicated.
- Replace the cover.
WIRELESS SENSOR (batteries not included)
- Open the batteries compartment cover (31) on the back of the unit.
- Insert 2 x 1,5V LR03 (AAA) batteries, respecting the polarity indicated.
- Close the cover.
1 - USE OF THE WHEATHER STATION
WEATHER STATION
Place the weather station on a flat horizontal surface.
SENSOR
The sensor can be installed:
- either on the wall using a screw (not included). Hang the sensor through the hole (30) on the back.
- or horizontally
For best results:
- Do not expose the sensor to direct sunlight or moisture.
- Do not place the sensor more than 10 metres away from the weather station.
- Minimise obstacles (doors, walls and furniture) between the sensor and the weather station.
- Keep the sensor away from metal or electronic objects.
TEMPERATURES AND HUMIDITY
The weather station displays the following information:
- Indoor temperature (12) measured by the weather station
- Outdoor temperature (13) and humidity (14) from the sensor
NOTE: The indoor temperature sensor is located on the back of the unit, so please do not obstruct
this area as this may affect the temperature reading.
WEATHER INDICATOR
When the unit is turned on, the weather station will show
the weather conditions in the form of icons:

POWER SUPPLY

1.5A ; 7.5W.
INSTALLATION / USE
ICON DESCRIPTION
Sunny
Sunny spells
Cloudy
Rainy