Specifications - Insignia NS-A1000 Guide De L'utilisateur

Insignia NS-A1000 Car Stereo Amplifier
Item Name
5 H PF
6 Remote bass
control knob
7 X-Over
8 L PF
9 Power/
protection
indicator LED
10 Line Output

Specifications

Model
@ 2 Ohms
@ 4 Ohms
Mono
Signal to Noise ratio
Channel separation
Frequency response ±1.0 dB
HPF
LPF
Adjustable sensitivity range
Input - low level
Impedance - high level
Fuse
Dimensions (W × H × L)
Function or Control
Set for High Pass Filter frequency (40 Hz to
250 Hz).
Turn clockwise to increase the bass output of your
amplifier (0-18 dB) without adjusting the amplifier.
Set for High Pass Filter, Low Pass Filter, or Full.
Set for Low Pass Filter frequency (40 Hz to
250 Hz).
Green LED lit—Amplifier is on and functioning
correctly.
Red LED lit—Amplifier is in self-protect mode.
Use these connections to feed audio to a second
amplifier. Line output is affected by the cross-over
settings on the amplifier.
www.insignia-products.com
NS-A1000
155 W × 2 channels
@ 1% THD
110 W × 2 channels
@ 1% THD
320 W @ 1% THD
>98 dB
>55 dB
10 Hz - 30 KHz
40 Hz - 250 Hz
40 Hz - 250 Hz
0.2-1 V
10K Ohms
100 Ohms
25AX2
10.2 × 2.1 × 12.8 in
(25.9 × 5.33 × 32.5 cm)
13