Technical Specification; Installation And Operation; Safety Instructions - Bartscher MX 250 Mode D'emploi

4.2 Technical specification

Name
Art. no.:
Design:
Power:
IP protection class:
Rotary speed
adjustment:
Dimensions:
Cable length:
Weight:
We reserve the right to make technical changes!

5. Installation and operation

5.1 Safety instructions

WARNING! Risk of electric shock!
The device must only be connected to a properly installed single socket with
protective contact.
Never remove the power cable by pulling the cable itself; always grab the plug
housing.
•
Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
•
Never place the device or other objects on the power cable.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
- 24 -
removable mixing stick: stainless steel
0.25 kW / 230 V 50-60 Hz
continuous, max. 15,000 RPM
Ø 75 mm, total length: 520 mm, mixing stick length: 250 mm
Stick mixer MX 250
130115
housing: plastic, orange
retaining flange: plastic
IPX3
1.8 m
1.35 kg