Krüger & Matz KM0812 Mode D'emploi page 16

6.3.5. GMT
Default time is set to GMT.
6.4. Alarm Clock
To enable Alarm, choose the Alarm you wish to switch on (1 or 2), and press
SELECT button. Next, select "Turn On" to switch on the alarm. Once you
turn it on, the screen will display Alarm options to adjust: repeat, time, and
alarm sound (beep, melody, internet radio (from favorite), FM (from preset).
To disable Alarm, select "Turn Off". Press any key to switch off Alarm when
it's ringing.
Note: If Alarm is set to wake you up with an internet station, but it does not work
in 1 minute, the device will automatically switch to buzzer.
Nap time will wake you up after a certain, previously selected time will pass.
You can choose from 5, 10, 30, 30, 60, 90, 120 minutes. Press any key to
switch off Alarm when it's ringing.
6.5. Language
Language settings.
6.6. Dimmer
You can select the brightness of the display.
6.6.1. Power Saving.
6.6.2. Turn on (Default setting) and regulate each option with a knob.
6.7. Power Management
Set a given time to turn off the radio automatically (5,15, 30 minutes).
6.8. Sleep Timer
You can set a related time to enter standby mode automatically (15, 30, 60,
90, 120, 150, 180 minutes).
6.9. Buffer
Select buffer time for internet radio playing (2, 4, 8 seconds).
6.10. Weather
Adjust weather display settings (show on standby, temperature units
and setting location).
6.11. FM setup
Set FM station as Mode (Mono/Stereo) and Area.
16
Owner's manual