OXO SunFlood 300 Mode D'emploi page 8

INFO
TIME
INFO
TEMP
INFO
TEMP
NOW
TEMP
MAX
SOFTWARE
C- SNAPSHOT
With SNAPSHOT you could record a DMX value directly into the SUNFLOOD 300
and then you could recall this value automatically without a console.
To do that, go to "SETTINGS / NO DMX" and select "SNAPSHOT"
Choose a DMX address and the DMX Mode "4CH".
Plug the SUNFLOOD 300 on a DMX line, set a Dimmer value with your DMX console
then put control channel (CH4) between 201 and 230 during 5 seconds.
The SUNFLOOD 300 will blink to confirm that the value is recorded.
Then you could unplugged DMX and restart the SUNFLOOD 300, it will get back automatically
to the recorded value.
User Manual - SUNFLOOD 300
Display product info
Display total time of use from first uses max value is
9999 H
Display temperature info
Display current temperature
To set temperature threshold
display software version of product
V1.0 01/2019 8/20