Intended Use; Bluetooth - Hilti Nuron R 6-22 Mode D'emploi

3 Description
3.1 Overview 1
3.2

Intended use

The product described is a cordless jobsite radio. It is designed for playing music as a radio receiver or from
various other devices that can be either paired with the product via Bluetooth or connected to it by an AUX
cable.
• The product is designed for a jobsite environment. Do not expose the product to moisture such as
running water, for example.
• Use the product only indoors.
• For this product, use only Hilti lithium­ion batteries of the B 22 series. For this product, Hilti recommends
the use of the batteries stated in the table at the end of these operating instructions.
• For these batteries, use only Hilti chargers of the type series listed at the end of these operating
instructions.
3.3 Items supplied
Jobsite radio, AAA batteries (2 of), operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4

Bluetooth

This product is equipped with Bluetooth (optional).
Bluetooth is a wireless data transfer system by which the two Bluetooth-enabled products can communicate
with each other over a short distance.
4 English
Display
@
Power button
;
Carrying handle
=
Antenna
%
Knob
&
Casing
(
Rubber armoring
)
Mode button
+
Preset button
§
Bluetooth button
/
Equalizer button
:
Time settings
∙
USB port
$
AUX port
£
Battery
|
NFC interface
¡
Battery compartment
Q
2309425
*2309425*