Télécharger Imprimer la page

Space 6216 Mode D'emploi

Fauteuil de directeur de luxe a mailles aerees

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la
liste et s'assurer que les quantités des pièces reçues sont correctes.
ÉTAPE 1 Insérer les cinq roulettes (2) dans la base (1) et pousser fort jusqu'à ce que chaque roulette (2)
s'encliquette.
ÉTAPE 2 Attacher les bras (7L et 7R) au coussin du siège (5) en utilisant six vis longues à tête
Phillips (8).
RESSERRER COMPLÈTEMENT LES VIS.
ÉTAPE 3 Attacher la plaque du siège (4) au coussin du siège (5) en utilisant quatre Vis courtes à tête
Phillips (9). RESSERRER COMPLÈTEMENT LES VIS.
ÉTAPE 4 Attacher le support du dossier (11) à la plaque du siège (4) avec la flèche orientée vers
l'avant du fauteuil en utilisant trois vis Allen (10). RESSERRER COMPLÈTEMENT LES VIS EN
UTILISANT LA CLÉ ALLEN (12).
ÉTAPE 5 Avec la base (1) debout et les roulettes (2) sur le plancher, insérer le vérin pneumatique
(3) dans la base (1). Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser la
pression vers le bas.
ATTENTION : VÉRIFIER QUE TOUS LES VIS SONT INSTALLÉS ET BIEN SERRÉS AVANT DE L'UTILISER.
ÉTAPE 1
1
2
8
x5
x3
7R
ÉTAPE 4
12
x3
10
11
4
6
3
6216 FAUTEUIL DE DIRECTEUR DE LUXE
à MAILLES AÉRÉES
MODE D'EMPLOI
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulette . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . . . . . . . . . 1
4. Plaque de siège . . . . . . . . . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . . . . . . . . . 1
6. Coussin du dossier . . . . . . . . . . . . . . . . . . . 1
7. Bras gauche (7L) et droit (7R) . . . . . . . . . . . 2
8. Vis longues à tête Phillips (bras) . . . . . . . . . 6
9. Vis courtes à tête Phillips (plaque du siège) 4
10. Vis Allen (support du dossier) . . . . . . . . . . 3
11. Support du dossier . . . . . . . . . . . . . . . . . . 1
12. Clé Allen . . . . . . . . . . . . . . . . . . . . . . . . . . 1
ÉTAPE 2
ÉTAPE 3
9
8
x3
7L
5
ÉTAPE 5
5
1
QTÉ
x4
4
1
5
WARRANTY
SPACE ® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
All SPACE ® chairs are built to meet or exceed ANSI BIFMA standards.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262,
Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the problem and obtain confirmation number. At it's option
Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty will be paid
by Office Star Products.
6216 DELUXE AIR GRID MANAGERS CHAIR
OPERATING INSTRUCTIONS
FEATURE
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up. To lower
seat height sit on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
3
• 2-TO-1 SYNCHRO TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of
the tilting feature. Turn knob (2) clockwise to increase tension
and counter-clockwise to decrease or ease the tension. To
lock return chair to the upright position and push lever (1) in.
To unlock pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (3) in to allow the arms to move up or
down freely. Release the button (3) once the desired height is reached.
WARNING
1. Use this product only one person at a time.
2
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
© Office Star Products June 2006

Publicité

loading

Sommaire des Matières pour Space 6216

  • Page 1 8. Use mild detergent only for cleaning. WARRANTY ÉTAPE 4 ÉTAPE 5 SPACE ® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows: • Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters. • 3 Years on upholstery fabric and foam against wear and deterioration. • Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use. *All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or less.
  • Page 2 6216 FAUTEUIL DE DIRECTEUR DE LUXE 6216 DELUXE AIR GRID MANAGERS CHAIR à MAILLES AÉRÉES ASSEMBLY INSTRUCTIONS MODE D’EMPLOI Remove all parts from carton, separate by part numbers indicated on parts list, and PARTS verify part quantities. CARACTÉRISTIQUES 1. Base ......1 STEP 1 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) 2. Caster .