Power Brush - ecofort Gtech Pro Manuel D'utilisation

Power brush

To attach the power brush line up and slot
it over the Gtech Pro nozzle. The power
must be off when changing accessories.
(The power button will now activate the
power brush as well as the suction.)
To clean the brush bar, first remove the
power brush from the Gtech Pro. Rotate the
latch from the lock to the unlock position and
pull out to remove the brush bar.
8
To remove the power brush, press the
latches on the sides of the power brush
and pull it away from the main unit.
To remove hair from the brush bar, run an
open pair of scissors down the groove to
cut the hair, then pull it out. Never operate
the power brush without the brush bar in.