Circuit Board Error Code; Factory Reset - Jaga Mini Canal Hybrid Manuel D'installation

7.3. CIRCUIT BOARD ERROR CODE
1
7.4. FACTORY RESET
1. Disable power charge.
1
-
MINI CANAL HYBRID | MANUAL | 09 06 2020, 09:44
- +
2. Press and hold down both the [-] and [+] button on the circuit board
and switch on the power again.
by the green LED
10 sec
Release the buttons as soon as all 3 LEDs are flashing.
3. The controller will return to the Factory settings, all LEDs will flash
for 10 seconds. The controller will return to the Factory Default
settings, all LEDs will flash for 8 seconds.
Error sensor [3] - Check the water tempe-
rature sensor
The blue LED
2 seconds later and the red LED
will light up, followed
4 seconds later.
61
EN