Fusion 25934 Mode D'emploi page 5

Zip-Trim
How to Install Batteries:
• Open the battery compartment cover on the side of the Zip-Trim and install 6 AA batteries (not
included). Replace the battery compartment cover.
• Note: Do not mix old and new batteries. Do not mix alkaline, standard or rechargeable batteries.
How to Use:
• Attach 2 zip ties to Zip-Trim. Slide the On/Off switch to the "On" position, and start trimming!
• For hard to reach places, or to extend your reach, just screw on the extension pole and then slide
to extend it to the exact reach you need. Extends up to 30".
• For added safety, or to use as a precision edger, just snap the debris shield
onto Zip Trim.
How to Remove:
• Using scissors or a utility knife carefully cut off at connector.
WARNING: Please use caution when using Zip-Trim.
Eye Protection: Wear proper eye protection whenever you operate the unit.
Hand Protection: Wear work gloves to improve your grip on the handle.
TIP: works with standard zip ties. For custom trimming, you can cut zip ties to the exact length
needed.
Extension Pole
www.ubtc.biz
UBTC Switzerland AG – Leuholz 14
8855 Wangen – Switzerland
Attachzip ties
Importer EU: UBTC Germany Gmb H
Rösrather Strasse 740 – 5 1107 Köln – Germany
Includes:
• Zip-Trim
• Lightweight Extension Pole
• Protective Debris Shield
• 24 Custom Cut Zip Ties
EN
Preciosion Edger
Art. Nr.: 25934