MCS Master CCX 4.0 Manuel D'utilisation Et De Maintenance page 10

en
►►1. INFORMATION
REGARDING SAFETY
IMPORTANT:
UNDERSTAND
OPERATIONAL MANUAL BEFORE
ASSEMBLING,
OR PERFORMING MAINTENANCE
ON THIS APPLIANCE. INCORRECT
USE OF THE APPLIANCE CAN
CAUSE SERIOUS INJURY. KEEP
THIS MANUAL FOR
REFERENCE.
IMPORTANT: This appliance is
not suitable for use by persons
(including children) with reduced
physical, sensory
capacities or with lack of experience
or knowledge unless supervised
by a person responsible for their
safety. Children must be supervised
to make sure they do not play with
the appliance.
►1.1. Fill the appliance tank only
with clean water.
►1.2. Switch off and disconnect the
appliance from the mains before
filling it.
►1.3. Do not move the appliance,
once the tank has been filled.
►1.4. When using the appliance,
comply with all local regulations
and Standard in force.
►1.5. Keep the appliance dry, in
order to avoid electric shocks.
Hands must always be dry.
►1.6. Use only in ventilated and dry
areas.
►1.7. For indoor use only.
►1.8. Power the appliance only with
voltage and frequency as specified
on the data plate.
►1.9. Only use extensions with three
wires appropriately connected to
earth.
Figures and texts of this book are protected by COPYRIGHT.
READ AND
THIS
COMMISSIONING
FURTHER
and mental
►1.10. Do not cover the appliance
with paper, cardboard, plastic,
metal sheets
inflammable material during use,
in order to prevent any risk.
►1.11. The appliance must be used
on a stable and levelled surface, in
order to prevent any risk.
►1.12. When
disconnect the appliance from the
power plug.
►1.13. Do not block the air vent or
the air outlet (front side) of the
appliance.
►1.14. The minimum safety distance
recommended
appliance and walls or other items
is 0,5 m.
►1.15. When
connected to the mains or running,
it must never be moved, handled,
topped-up or
maintenance operation.
►1.16. The appliance (power cable
included) must be kept at a suitable
safety distance from heat sources.
►1.17. In any case, the appliance
must be opened and/or repaired by
authorised after-sales centre.
►1.18. If the
damaged, it must be replaced by
the technical after-sales centre, in
order to prevent any risk.
►1.19. Rinse the case with clean
water and clean it before using,
after the period during which the
cooler was not in use.
►1.20. In the case of improper
operation of the product at the
start, disconnect itfrom the power
supply immediately and contact
service point.
►1.21. Protect the power supply
cord from damage as a result
of movement of the vehicles or
or any other
it is not used,
between the
the appliance
subject to any
power cable
is
is