Samsung SEB-100 Manuel D'utilisation page 4

Precautions for Installation and Use
Check if the place is hard enough to endure 5 times the total
weight(100g or so) of SEB-100(Samsung Extension Box) before
E
installation.
Avoid strong vibration or impact to prevent breakdown of the
device.
Do not let a heater in the neighborhood.
Keep a distance from strong magnetic force or electronic wave.
Be sure to take the camera at least 100m and at most 300m apart
from the monitor.
Connect a camera to only one SEB-100.
Mind the connection port, IN or OUT for the cable connection.
If reversed, the unit will not operate.
Don't let the cable get stuck in a wrong place nor let the insulating
cover peeled. (to avoid breakdown or fire)
Don't let people or valuables under the installation place so that
they don't get hurt from a falling material.
Don't touch other switches than requiring adjustment before
installation (Cable Length Selection Switch) to avoid breakdown
or abnormal operation.
6
Keep the SEB-100 within 300m from the camera. Otherwise, the
camera may not operate.
Put the SEB-100 and outdoor adapter in a cool place free from a
direct ray regardless of that you use or just keep it.
Be sure to use a rated adaptor for the SEB-100 to prevent break
down or fire.
Be sure to use the SEB-100 and adaptor in a place with the
following temperature and humidity all the time.
- Temperature : 10°C ~ + 50°C (14°F~122°F)
- Humidity : <~90%
Be careful for the cable to prevent short or cut.
Plug out immediately in the event of lightning or if you don't want to
use the SEB-100 for a long time.
E
7