System Setup
Use the System Setup menu to adjust your player's system options.
In DVD-VIDEO mode, press <SETUP> on the remote control to access
the System Setup menu.
Press the <LEFT> or <RIGHT> navigation keys to browse the setup
pages at the top of the menu (i.e., GENERAL, AUDIO, DOLBY, VIDEO,
PREFERENCE). Press <ENTER> to select a page and browse its menu
options.
Press <UP> or <DOWN> to browse the menu options. Press
<ENTER> to select an option or press <LEFT> to return to the previ-
ous menu level.
Press <SETUP> to exit the System Setup menu.
General Setup Page
TV Display
If the system is connected to an HDTV, select 16:9. If it is connected to
a conventional TV set, select 4:3 PANSCAN or 4:3 LETTERBOX. The 4:3
image will be displayed in full screen in its native aspect ratio.
4:3 PANSCAN: The wide-screen image will be displayed on the screen
in its native aspect ratio with some part on the left and right cut off.
4:3 LETTERBOX: The wide-screen image will be displayed in its native
aspect ratio with black bands on the upper and lower sections of the
screen.
16:9: If the unit is connected to a widescreen TV set, select this
option. The widescreen image will be displayed in full screen in its
native aspect ratio while the 4:3 image will be stretched out horizon-
tally to fit in the screen.
Page 34
Coby Electronics Corporation