babymoov Turbo Pure Notice D'utilisation page 16

- Press the "STERILISATION + DRYING" button
- Press the "STERILISATION + DRYING" button
three times for the 38-minute program. The cycle to be selected depends on the drying time required: refer to the previous
section "Adapt the drying cycle".
x 1
53 00
Total 53-minute cycle =
8 minutes sterilisation
+ 45 minutes drying
- After selecting the time, press "OK" to start the cycle.
- The timer displays the selected time and starts counting.
- When "STERILISATION + DRYING" mode is finished, 3 alarm beeps are sounded. The timer displays 00:00.
- After the end of the cycle, other functions can be run by pressing the relevant button.
The display panel will remain on, press "OK" and the appliance will turn off.
- To switch off the appliance straight after the end of a cycle, press "ON/OFF".
- Press the "STERILISATION" function
- The timer displays 08:00 and flashes.
08 00
- After selecting the time, press "OK" to start the cycle.
- The timer displays the selected time and starts counting.
- When "STERILISATION" mode is finished, 3 alarm beeps are sounded. The timer displays 00:00.
- After the end of the cycle, other functions can be run by pressing the relevant button.
The display panel will remain on, press "OK" and the appliance will turn off.
- To switch off the appliance straight after the end of a cycle, press "ON/OFF".
- Press the "DRYING" function
- The timer turns on, displaying "30:00" (default drying time).
- Press the "DRYING" function
x 1
30 00
- Once the drying time is selected, press "OK" once to start drying.
- The timer displays the selected time and starts counting.
- When "DRYING" mode is finished, 3 alarm beeps are sounded. The timer displays 00:00.
- After the end of the cycle, other functions can be run by pressing the relevant button.
The display panel will remain on, press "OK" and the appliance will turn off.
- To switch off the appliance straight after the end of a cycle, press "ON/OFF".
NB: the appliance will switch off if not in use for 2 hours and all settings will revert to their default values.
16 TURBO PURE BABY BOTTLE STERILISER & DRYER • Instructions for use
STERILISATION + DRYING
, which will then turn on.
once for the 53-minute program, twice for the 68-minute program, and
x 2
68 00
Total 68-minute cycle =
8 minutes sterilisation
+ 60 minutes drying
STERILISATION
DRYING
once, and the function will turn on.
to change the drying time (the order is as follows: 30/45/60 minutes).
x 2
45 00
once, and the function will turn on.
x 3
38 00
Total 38-minute cycle =
8 minutes sterilisation
+ 30 minutes drying
x 3
60 00