Adjusting The Brake - Just4motion E-mo Manuel D'utilisation

Folding
To fold:
Make sure that the electric scooter is turned off, open the pole lock,push down the base pole and fix the folding
hook to the folding lock.
To unfold:
Press the folding hook to release and follow the folding step reversely to unfold the E-scooter.

Adjusting the brake

• Use the M5 hex wrench anticlockwise to release the plate screws on back wheel, adjust the length of
exposed tail, shorten for tightening and lengthen for loosing the brake.
• Lock the pressure plate screws by rotating clockwise.
Fix the handle
If your standpipe in the electric scooter is shaking, please use the M5 hex wrench to lock the two screws at the
folding mechanism.
page 19