Health And Safety; Washing Instructions - Econo-Heat ecare Guide D'utilisation

EN ENGLISH
make sure that the ECono-hEAt™ eCare™ low voltage electric blanket is the correct size for your mattress. do not use an over
1
sized electric blanket and tuck it in.
place the electric blanket directly on the mattress with the label at the top end of the bed facing upward.
2
Starting at the foot end of the bed fit the electric blanket to the mattress with the elastic bands provided. Then secure the top end. At
3
the top end there might be a small overlap of the electric blanket, depending on the length of the mattress. The flexible elastic bands
will ensure that the electric blanket fits all mattresses. Ensure that electric blanket is flat on the mattress with no folds or creases.
Carefully fit the bottom sheet over the electric blanket, ensuring that the electric blanket remains flat.
4
opEratING your bLaNkEt
Ensure that the flexible lead from the control switch is firmly plugged into the socket of the electric blanket.
1
plug the AC/dC adaptor (part no. ZBhWX-A290020-A) into the wall socket and switch on. A green lEd light on the adaptor will
2
indicate that the adaptor is working.
move the slider switch on the controller to the desired heat setting recommended for continuous use: position i – low (±25°) or
3
position ii – medium (±30°). the red lEd light will indicate that the blanket is on. position iii (Boost, ±35°) is not recommended for
continuous use.
pUshBUtton boost settings (see pictorial diagram
4
a) sinGlE tAp Boost modE (20 minute preheat timer): to preheat the electric blanket, set the control slide switch to the
desired setting recommended for continuous use – position i or ii and press the
will indicate that the electric blanket is in boost mode. After 20 minutes the green lEd light will turn off and the control switch
will automatically revert to the pre selected heat setting.
b) doUBlE tAp Boost modE (1 hour auto off timer): to activate the 20 minute boost and 1 hour auto off timer, preset
the control slide switch to the desired setting recommended for continuous use – position i or position ii and press the
pUshBUtton tWiCE. The flashing green LED light will flash indicating that the electric blanket will preheat (boost) for 20
minutes and then automatically switch to the pre selected heat setting. the electric blanket will remain on for a further 40
minutes and then automatically switch off. to switch the electric blanket on again move the control slide switch to position
o - off and back to the desired heat setting recommended for continuous use:
position i – low or position ii – medium.
AUtomAtiC EnERGy sAVER 10 hoUR sWitCh off: the control switch is designed to automatically switch off after 10 hours
5
of continuous use. if the electric blanket is still required move the control slide switch to position o – off and back to the desired
heat setting recommended for continuous use: position i – low or position ii – medium.
Unplug the AC/dC adaptor from the wall socket when not in use.
6
a Wall plug B power supply
doUBlE*, QUEEn & KinG siZE BEds
fEaturES
➜ low voltage technology - the Ultimate in health and safety
➜ 100% shockproof
➜ Eliminates harmful electromagnetic radiation associated
with high voltage electric blankets
➜ machine washable
➜ Soft, luxurious and comfortable
➜ outer covering made from 100% cotton
➜ three heat settings – low, medium and high with two
convenient off positions
➜ 20 minute ( ) preheat boost timer
➜ Low setting is extra low which provides a desirable setting
for a comfortable all-night sleep

HEaLtH aNd SafEty

the ECono-hEAt™ eCare™ low voltage electric blanket uses only 21 V dC and emits minimal electromagnetic waves, making it a
safe and healthier choice compared to high voltage electric blankets.the blanket is machine washable and is made of 100% cotton
exterior so that you can sleep undisturbed all night long.It is entirely non-hazardous and 100% shock-proof (even if it comes into
contact with liquids) which means that it is totally safe to sleep with the blanket switched on.

waSHING INStructIoNS

Washing the blanket is easy. please follow these instructions.
the blanket inside the washing machine. Wash and spin dry using the 'gentle' cycles (30 - 40˚C).
commercial dryer or at the laundromat. tumble dry for 10 minutes on the 'low' setting of your dryer and then drape the blanket over
a washing line until completely dry.
lukewarm water using a mild soap. do not scrub. Rinse well and hang over a washing line until completely dry.
do not wet the electric control switch.
do not dry clean.
do not wash the blanket if any wires have worn through the fabric.
do not use bleach.
fIttING your bLaNkEt
C Control switch
hAnd WAshinG: detach the cord from the electric blanket. soak the blanket for 15 minutes in
below):
D Removable Controller
sinGlE & doUBlE* siZE BEds
➜ turns off automatically after 10 hours if left on accidentally
➜ Convenient user-selectable one hour timer – automatically
switches off after falling asleep
➜ Reaches a comfortable, naturally warm environment close
to body temperature
➜ Available in single, double, queen and king size
➜ Easy to fit - adaptable elastic straps fit all mattress heights
and lengths
➜ international safety standards approved
➜ two year warranty
mAChinE WAsh: detach the cord from the electric blanket and place
do not iron.
do not reconnect the blanket until it is completely dry.
do not wring.
pUshBUtton onCE. the green lEd light
GREEn lEd
REd lEd
off
hiGh
mEdiUm
loW
off
*The double blanket (137 x 200cm)
is available with single or dual
controllers.
mAChinE dRyinG: do not dry in a
pUsh BUtton
press once = Boost
(20min preheat timer)
press twice = Boost
(1hr auto off timer)
REd slidER
(heat selection)