Page 1
Mobility Power Pack Montageanweisung und Bedienungsanleitung Installation- and instruction-manual Montage instructies en gebruiksaanwijzing Instructions d´assemblage et mode d‘emploi...
Inhaltsverzeichnis 1. Produktbeschreibung 4. Betrieb 2. Sicherheitshinweise 5. LED-Anzeigen 3. Installation 6. Spezifikationen 1. Produktbeschreibung Montageanweisung und Bedienungsanleitung – deutsch ......3 Das Mobility Power Pack ist ein sehr leichter 12 V Li-Ion Batteriepack, der in der Lage ist, sehr hohe Ströme zu liefern.
3. Installation 4. Betrieb Das Mobility Power Pack lässt sich an die Wand oder auf den Boden montieren. Ein Abstand von 10 cm für die Über die Drucktaste lässt sich das Mobility Power damit stark verringern. Auch bei zu weichen Reifen Belüftung ist einzuhalten.
6. Spezifikationen Eine Fehlermeldung wird durch das widerholte Blinken beider LEDs angezeigt, gefolgt von einer Sekunde Pause. Blinkzahl der LEDs, Eingangsspannung: Netzadapter: 12.0 V/DC gefolgt von 1 Sekunde Beschreibung/Lösung Fastons: 11.0-21.0 V/DC Pause Eingangsstrom: Netzadapter: 1.0 ADC Tiefentladung. Laden notwendig. Fastons: 5.0 ADC Zu hohe Temperatur.
Page 5
Index 3. Installation 1. Product description 4. Operation The Mobility Power Pack can be mounted on the wall or on the floor. It must have 10 cm space around for 2. Security advice 5. LED indications ventilation. 3. Installation 6. Specifications 1.
4. Operation If both LEDs are blinking a number of times (followed by rest), this indicates a failure. Number of flashes To switch the Mobility Power Pack on, press the the wheels than required. Otherwise the current by the LEDs followed Description/remedy button or the external switch.
3. Installatie 4. Bediening Het Mobility Power Pack kan aan de wand gehangen worden of op de vloer geplaatst worden. Er moet ten Om het Mobility Power Pack aan te zetten, dient u op op de wielen te draaien dan nodig is. Anders kan minste 10 cm ruimte rondom zijn voor de ventilatie.
6. Specificaties Als beide LEDs een aantal maal knipperen (gevolgd door een rust), dan geeft dit een storing aan: Aantal maal knip- peren van de LEDs, Beschrijving/remedie Ingangsspanning: Netadapter: 12.0 V/DC gevolgd door een rust Faston aansluitingen: 11.0–21.0 V/DC Diepontlading. Laden is nodig. Ingangsstroom: Netadapter: 1.0 ADC...
Index 3. Installation 1. Description du produit 4. Fonctionnement Le Mobility Power Pack peut être fixé au mur ou au sol. Il doit y avoir 10 cm d’espace autour 2. Conseil de sécurité 5. Indications LED pour la ventilation. 3. Installation 6.
4. Fonctionnement Si les deux LED clignotent un certain nombre de fois (suivi de pause), ceci indique un problème. Nombre de clignote- Pour allumer le Mobility Power Pack, appuyer sur le aux roues. Sinon, la consommation de courant peut ment par les LED suivi Description/dépannage bouton ou l’interrupteur externe.