NGM Dynamic STYLO Guide Rapide page 33

Connectivity
To better use the potentiality provided by the device and its operating system, you need to
have an active data connection; data connection of NGM Dynamic Stylo is active when you
first power ON the phone. If not provided by operator subscription, data traffic may cause
you extra fees, so it is recommended to configure Internet connection via WiFi. To enable
data traffic on one of the USIM cards, select Settings > Dual SIM Settings > Data
connection.
Connect to the Internet using Wi-Fi®
You can connect to the WLAN using the Wi-Fi option. To activate it, from the main menu
choose Settings > WiFi I/O. Please follow all warnings and indications concerning the use of
wireless devices in areas where the use of such functions is restricted (airplanes, hospitals,
etc.). Go to the offline mode when you are allowed to use only the functions that do not
require Network access.
Connecting to a Bluetooth® device
Turn on the Bluetooth device you want to connect with. Refer to the device
documentation.
From the main menu, choose
contextual menu you will find additional functions and settings.
Choose Search for devices to automatically find other Bluetooth devices.
Among the discovered devices, select the device name to associate with. The phone will
attempt to associate with the device, which may be asked for a pairing code.
Settings > Bluetooth I/O to turn Bluetooth on. In the
Dynamic
ENGLISH 33