Clock Setting - White-Line MC928S Mode D'emploi

OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.

1.Clock Setting

When the microwave oven is electrified,the oven will display "0:00", buzzer will ring
once.
1) Press " CLOCK/KITCHEN TIMER " once. "00:00" displays.
2) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour).
3) Press " CLOCK/KITCHEN TIMER ", the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press " CLOCK/KITCHEN TIMER" to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " STOP/CLEAR ", the oven
will go back to the previous status automatically.
2. Microwave Cooking
Press " MICROWAVE "several times to select the function you want. Then press
START/+30SEC./CONFIRM to confirm.
Press " START/+30SEC./CONFIRM " to start cooking.
Example: If you want to use 80% power to cook for 20 minutes, you can
operate the oven as the following steps.
1) Press " MICROW A VE " twice, the oven will display "P80".
2) Press " START/+30SEC./CONFIRM " to confirm.
3) Turn " " to adjust the cooking time until the oven display"20:00"
(The maximum cooking time is 95 minutes.)
4) Press " START/+30SEC./CONFIRM " to start cooking, ":" will light and the
" " indicator will flash.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
Microwave Power Chart
Press
Microwave Power
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
Once Twice
100% 80%
Turn " " to adjust the cooking time.
Thrice
50%
EN-9
4 times 5 times
30% 10%