Installation And Commissioning - esotec PRO Water Spray Professional Mode D'emploi

6. Installation and commissioning

1. Carefully remove all parts from the packaging. Make sure that you
have definitely removed all parts before you dispose of the pack-
aging materials in an environmentally friendly manner.
2. Now attach the connection hose with the check valve (Fig. 2) to the
'Water Outlet' output of the watering computer.
3. Now lay out the supply hose (8 mm) as shown in Figure 1. Install
the 2 reducers 8/4/8 mm into this line (as required). Please note
that each reducer can supply max. 10 sprayer nozzles with water.
Assembly of the T-distributor 8/4/8
- Unscrew the two screw connections from the
T-piece (Fig. 3/1).
- Insert the hose through the screw socket and
push it firmly onto the cone provided on the
T-piece (Fig. 3/2).
- Push the two screw connections over the hoses
and tighten them.
Note: Please only tighten the screw connections by
hand. Do not use pliers or similar for this.
4. As soon as you have laid out the main supply hose, close it at the
end with the hose cap supplied (Fig. 4).
5. Now lay out the watering network as shown in Figure 1. Use the 4
mm outlet hose and the 4 mm T-pieces for this. In order to ensure a
good and stable water supply, at least 10 sprayers should be con-
nected to the irrigation computer. Each T-piece (8/4/8), however,
can take max. 10 sprayers.
6. Now attach the sprayer nozzle to the ground spike (Fig. 5/1) and
insert it into the ground.
7. Now connect the 4 mm outlet hose to the water connection of the
ground spike (Fig. 5/2), the other end is connected to the 4 mm
outlet of the T-piece.
8. Now switch on the watering computer on its underside (ON / OFF).
Then press the 'TEST MODE' button on the touch control panel.
The system now draws in water and, at the same time, ventilates
itself. Once water is coming from all the sprayers, please press the
'MODE SELECT' button until the desired watering time appears.
The system will now water automatically at sunrise and sunset.
Note: Please also note the operating instructions for the watering
computer!
10
3
2
4
hose cap
5
2
1
1
2