Changing The Filter - Ayce ANTARTICA Manuel D'utilisation

• Lift the "Cool Comfort" and press the tab on the front of the base first . Once the front
slides down, press the rear tab and slide the water tank down and fill with water.
• Replace the water tank and place the "Cool Comfort" on a flat surface.
• Plug the USB cable into the back of the "Cool Comfort" then plug the USB cable into
the power adapter, PC, laptop or any USB power source.
• Follow the How to Use instructions in order to best enjoy your "Cool Comfort".

CHANGING THE FILTER

• Unplug the "Cool Comfort" from the power source.
• Gently squeeze the tabs at the base of the unit to remove the water tank.
• Look inside the "Cool Comfort" and push the 2 tabs outwards to allow the water filter to be
released.
• Once the filter is released, simply slide the filter out.
• Place the replacement filter in the bottom of the unit and gently push into place until you
hear a click to indicate the filter is securely in place.
• Replace the water tank and push back into place.
MAINTENANCE
• We recommend regular cleaning of the water tank, twice weekly. Simply add a teaspoon of
white vinegar and warm water into the water tank and rinse thoroughly.
• For best results, we recommend replacing the water filter once every six months.
• When you wish to store the "Cool Comfort", we recommend you empty the water tank and
running on HIGH fan speed before powering off to allow for drying.
36 | 37
GB