Before First Use
Before the first use, we recommend that you wash the pot well and then
•
rinse with plenty of water. After this, you should prepare some coffee and
discard it. The coffee maker pot is suitable for all classical types of stoves.
Preparation of coffee
1. Remove the top coffee chamber by unscrewing from the base.
2. Fill the lower container with cold water up to the safety valve (a) (Fig. 2).
3. Next, insert the mesh funnel (b) and fill it with ground coffee. Do not press
the coffee down (Fig. 3).
4. Once you have removed the excess coffee from the edge of the funnel,
screw the upper container (e) with filter plates (d) and gasket (c) onto the
lower container. Avoid applying pressure to the handle.
5. Place the pot on the stove. If you are using a gas stove, make sure that the
flame does not extend beyond the edge of the pot. Once the top is filled
with coffee, remove it from the stove.
Maintenance and Care
Before carrying out cleaning and maintenance, wait for the appliance
to cool completely.
IT IS RECOMMENDED TO CARRY OUT A PERIODIC MAINTENANCE OF THE COFFEE
MAKER TO KEEP THE PRODUCT IN GOOD WORKING ORDER FOR A LONGER
PERIOD.
Only clean your coffee maker pot with water. Do not use detergents or
abrasive sponges. The aluminum components are not dishwasher safe. Only
reassemble the components once they have completely dried. Do not screw
too tightly when not in use. Regularly check the wear of the seal and the filter. if
you notice that they are worn or damaged, replace them with genuine spare
parts.
Instructions for use
English
3