Télécharger Imprimer la page

Orbegozo CE 6000 Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

CE 6000
switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
26. They must maintain a minimum distance between the
appliance and combustible materials such as furniture
and curtains 30cm while the device is connected to the
mains.
These instructions for use belong to the appliance and
must be kept in a safe place. When changing owners, these
instructions must be surrendered to the new owner!
HOW TO USE
1. Connect the cable to the power socket of the appliance. Once this is done, connect the cable to the
electrical network for 3 minutes (0.05 hours).
2. After these 3 minutes (0.05 hours) have elapsed with the appliance connected to the mains, unplug the
cable from the mains and then from the appliance.
3. Insert the device into the case it is supplied with.
4. IMPORTANT: The heater must always be used with its cover.
IMPORTANT ADVICES
Do not connect the unit to the mains socket during more tan 3 minutes (0,05h).
-
Before using the heater, make sure that the temperatured reached is not too high for the means you
-
are going to use it. Note that the temperatura of the unit keeps increasing during approx. 10
minutes.
Unplugg the unit after 3 minutes (0,05h) even though the light pilot is not turned off.
-
TECHNICAL FEATURES
230 V, 50 Hz and 850 W
Charging time: 0.05 h (3min).
m = 0.75 kg
Rated Load: 42.5 Wh
STORAGE
10

Publicité

loading