Configuring The Device - Prodipe STUDIO 22+ Manuel Utilisateur

Outputs
One MAIN MIX stereo output:
• Dual Jack socket (balanced/unbalanced) (5).
• MAIN MIX output level knob (11)
• Hi-Z line/instrument impedance button (15).
One Stereo headphone output:
• PHONES stereo Jack socket (6).
• PHONES output level knob (9).
One stereo USB audio port (7):
• Stereo BUS channel (to Mac or PC).
• USB power (USB A to B cable supplied).

Configuring the device

In Mac OS, CoreAudio automatically recognises and selects your sound card. If this doesn't
happen, go to Applications>Utilities>Audio MIDI Setup. Then select Studio 22+ and make it the
main audio input/output.
In Windows, setup requires the Prodipe ASIO2 driver, which is available to download free on the
Prodipe USB audio Interface Studio22+ webpage at the address below. Click on 'Download the
Asio 2 driver' or on the 'User Guide' tab:
http://www.prodipe.com/nos-produits/interfaces-audio/3406-interface-audio-usb-studio-22.html
You can also download the instructions for the ASIO2 driver on the Prodipe website.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
Page 14