Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How your dishwasher cleans
Your dishwasher cleans by spraying a mixture of hot water
and detergent through the spray arms against soiled
surfaces. First, the dishwasher drains for a few seconds
to remove soils dropped while loading, then fills with water
covering the filter area. Water is then pumped through the
spray arms. Soil particles go through and across the filter
and down the drain as the water is pumped out. This series
of steps are repeated as needed. The number of water fills
varies with the cycle being used.
Tub Gasket
Cup Shelves
Soft Grip Rack
Middle Spray
Arm
Stemware Holder
Bottom Rack
Lower Spray Arm
Detergent
Dispenser
Rinse Aid
Dispenser
Getting Started
To run your dishwasher, follow these basic steps:
1. Load the dishwasher (See Preparing and Loading
Dishes).
2. Add the detergent (See Dishwasher Dispenser and
Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Select desired cycle (See Cycle Chart).
5. Select desired Option (See Energy Options).
6. Run hot water faucet nearest dishwasher until water is
hot. Turn off water.
7. To start, press START pad and close the door.
FEATURE OVERVIEW
Upper Spray
Arm
Racks and Features in your dishwasher model may vary in
appearance from illustrations in this manual.
4
Cutlery Tray
Adjustable Rack
Mechanism
Upper Rack
Wash Plus
Interior Light
Silverware Basket
Filters
Serial Label
(located on right
side of door)
NOTE
Publicité
Table des Matières
