Akku Power 90-53-12 Mode D'emploi page 5

6.) Safety instructions:
• Read and strictly observe the operating instructions.
• Protect the device from humidity and heat.
• Never use any device that is damaged.
• Do not unscrew the device.
• The device must only be repaired by authorised specialists
7.) Start-up and use:
1. Permanent red LED indicates that the device is ready
for operation.
2. Does the LED not flash, the device is switched off.
There are 4 possible reasons for this:
a) The tool is switch off from the power supply
b) An excessive temperature increase has occurred
(temperature protection).
c) A short circuit has occurred (short circuit protec-
tion).
d) The device is defective.
9.) Warranty:
The device carries a 12-month warranty, which is valid
from the invoice date. This warranty does not cover da-
mage caused by overloading or improper handling.
10.) CE Declaration of Conformity:
We declare, under our sole responsibility, that this product conforms to the following standards or normati-
ve documents: EN 61558-1:2005+A1:2009, EN 61558-2-6:2009, EN 61558-2-16:2009, EN61000-4-5 ed.2:2007,
EN61000-4-11 ed.2:2005, EN55011 ed.3:2010, EN 50581:2012.
In accordance with provisions of guidelines 2006/95/EG, 2004/108/EG, 2011/65/EG.
Akku Power GmbH
Paul-Strähle-Str. 26
D-73614 Schorndorf
Tel.: +49 7181 - 97735-0
Fax:: +49 7181-97735-29
www.akkupower.com
8.) Symbols:
Please read the operating
instructions before use.
Conformity symbol
Protect the device from fire
and heat
Do not dispose the device
with domestic waste.
Transformer with double
insulation
Protect the device from
moisture and water
AC adapter
Schorndorf, 19.02.2015
David Bech, Managing Director
Rights of errors and printing errors reserved. 02/2015
5 I ENGLISH