Safety Information; Description / Scope Of Delivery - Runpotec RUNPOLIFTER 4500 Notice D'emploi

ENGLISH
8
INTRODUCTION
Thank you for purchasing this RUNPOTEC RUNPOLIFTER 4500. These instruc-
tions for use provide information on safe use. Please read the instructions
for use thoroughly before commissioning. If you have any questions about
commissioning, assembly, safety and applications, or problems, please
contact your authorised retailer or RUNPOTEC. You will find our contact
data on page 2.

SAFETY INFORMATION

I Maximum drum weight 4500 kg
II The cable pull-out angle must be 90° to the drum axis
III Maximum lateral force 20 kg for 4500 kg load
IV Maximum drum diameter Ø 1600 mm
V Make sure that the cable drum is centred
VI Stainless-steel safety holder – Ensure correct insertion!
 Set up the RUNPOLIFTER on a firm, horizontal surface.
 The RUNPOLIFTER may only be operated by persons who have been
trained in its use.
 Always ensure safe operating condition before use. Do not use if
damage to the device has been determined.
 The operating staff must use personal protective equipment in line with
the construction site assessment.
 Before starting work, remove any obstacles in the work area.

DESCRIPTION / SCOPE OF DELIVERY

1 Locking pin for folding out the jack
2 Locking pin for folding in the jack
3
Crank handle with 2-stage gear for lifting or lowering the drum
4
Centring taper with integrated quick lock
5
Drum shaft with integrated heavy-duty bearings
6
Cable drum shaft holder
7
Carrying handles
8 CE mark/Year of construction – see type plate
9
Fastening options
10
1 x jack, left
11
1 x jack, right
12
1 x Drum shaft with integrated heavy-duty plain bearings
13
2 x centring tapers with integrated quick lock
All images are representative. Changes and printing errors excepted.
STRONGEST CABLE PULLING
see load diagram

WWW.RUNPOTEC.COM