LENCO SCD-300 Mode D'emploi page 4

This device must operate on a power source as specified on the specification label. If you are

not sure of the type of power supply used in your home, consult your dealer or local power
company.
The socket outlet must be installed near the equipment and must be easily accessible.

Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

Devices with Class 1 construction should be connected to a main socket outlet with a

protective earthed connection.
Devices with Class 2 construction do not require a earthed connection.

Keep away from rodents. Rodents enjoy biting on power cords.

Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord.

This can cause a short circuit.
Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

When the device is not in use for long periods, unplug the AC power cable for safety reasons.

To clean the device, use a soft dry cloth. Do NOT use solvents or petrol based fluids. To remove

severe stains, you may use a damp cloth with dilute detergent.
The supplier is not responsible for damage or lost data caused by malfunction, misuse,

modification of the device or battery replacement.
WARNING: Prolonged exposure to loud sounds from personal music players may
lead to temporary or permanent hearing loss.
The USB memory stick should be plugged into the unit directly. Don't use an USB
extension cable because it can cause interference resulting in failing of data.
3