Cleaning, Care & Maintenance - Caterlite J709 Mode D'emploi

Cleaning, Care & Maintenance
• Always turn off and disconnect the appliance from the power supply before cleaning.
• Use soapy water and a damp cloth to clean the exterior of the appliance.
• Dry thoroughly after cleaning.
Descaling
In hard water areas lime scale can build up within the appliance after prolonged use. To de-scale the
appliance:
1. Pour a solution of de-scaler and water into the appliance.
2. Brush the interior gently with a soft bristled brush.
3. Discard the solution collected in the jug.
4. Fill the appliance with clean water and turn back On to flush out the system. Flush out the system
thoroughly to remove any de-scaler residue.
5. The appliance is now ready for use.
Note: Use a suitable descaler and always follow the instructions on the
packaging.
Caterlite recommend that this appliance is descaled every 3 months or more
frequently in hard water areas.
Troubleshooting
Fault
The unit is not working
Power light comes on
but water does not
reach temperature
Heating time has
increased
The tap is leaking
J709_J722_ML_A5_v5_20190628.indb 5
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Thermal cut-out switch has
activated
Thermostat fault
Buildup of scale
The tap has become loose
Solution
Check the unit is plugged in correctly and
switched on
Call Caterlite agent or qualified technician
Replace the plug fuse
Check power supply
Call Caterlite agent or qualified technician
Reset Thermal cut-out switch (Page 4)
Call Caterlite agent or qualified technician
Descale the appliance
Tighten the tap handle
UK
5
2019/6/28 17:36