IBCONNECT PRISMA Manuel D'installation page 14

user manual
14
15
2
1
PRISMA WITH SUPPORT. REMOVING REAR
COVER.
The first thing we have to do to be able to access
the media connectors is removing the back
cover of the product. Pic.14A.
A
To be able to remove the back cover of the
product, we have to exert upward force in the
bottom edge of the back cover. Pic. 14B.
SUPPORT MOUNTING
Once we have removed the back cover we are
ready to mount the support into the desk. Pic.15B.
B
STEP 1
Loosen the main part of the support (1). Turn it
clockwise till it is disassembled. Pic.14B.
STEP 2
Remove the washer (2). Pic.14B.
PERFORM HOLE FOR THE SUPPORT
Make a through hole with a crown-driller of
30mm Ø as shown in the picture 15
ES EN