Using The Memory Loader Application; Memory Back-Up Battery - Panasonic RC-DC1 Manuel D'utilisation

Using the Memory Loader application

This main unit is designed to operate with the Memory Loader
application which can be downloaded from the App Store
(search for MemoryLoader).
If you have not already downloaded the free Memory Loader
application, you will see the following message on your iPod
touch or iPhone display:
Application Not Installed
This accessory requires an
application you do not have
installed. Would you like to install it
from the App store?
This message is a reminder for you to download the application
in order to enjoy the enhanced features of this main unit.
However, your iPod touch and iPhone will work properly with
this main unit even without the Memory Loader application
installed.
The Memory Loader application only works with iPod touch and
iPhone running on OS 3.0 or later.
Once the Memory Loader application is installed into your
iPod touch or iPhone, the following functions can be easily
accessible and controlled directly through the application's
platform.
Alarm
• Adjust alarm 1 and alarm 2 settings easily.
• You may select any combination of days for the alarm to
sound.
• You can choose your desired snooze settings from a choice
of 1 to 30 minutes.
Radio
• Preset 5 FM or 5 AM channels by scrolling through your
desired frequencies by using the selector.
Events
• You can be alerted of dates stored on your iPod touch or
iPhone contacts (if the alarm is set to sound on that day).
Nap
• You can set a short nap timer or countdown on your iPod
touch or iPhone.
Daylight saving time (DST)
• Activate or deactivate the daylight saving time function with
one simple step.
For more information, visit: www.memoryloader.com

Memory back-up battery

The back-up battery (CR2032, not included) saves the clock
and alarm settings in the event of a power interruption.
Inserting the battery
When there is no battery, the battery-weak indicator will be
displayed until a battery is inserted.
Bottom view
1
Keep the AC adaptor connected to the household AC
outlet when unscrewing the screw on the cover of the
battery holder using a screwdriver.
2
Open the cover of the battery holder.
3
Insert a new battery with the (+) side facing up.
4
Close the cover of the battery holder and secure it with
the screw.
Replacing the battery
The service life of this battery is approximately 1 month.
When the battery is weak, the battery-weak indicator will blink
constantly on the display.
(Continued on next page)
11 11
11