ATT NUSSBAUM POWER LIFT HF 3S 3000 Manuel D'exploitation page 91

Time frame Position
Type of
maintenance
12
1
11
2
10
1 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
12 x / 12
9 3
4
8
5
7
6
12
11 1
2
10
1 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
1 x / 12
9 3
4
8
5
7
6
OPI-POWER LIFT HF 3S 3000-4000-V3.2-DE-EN-FR-ES-IT
Lifting arm booms, lifting arm bolts, carrier plate threaded bolts are
to be checked for ease of running. If required, lightly grease with
multi-purpose grease. Do not over-lubricate.
Version with MINI-MAX lifting arm
1. Blow out and spray bolts. Check
the rollers for wear.
2. Check the locking screws (this
is only screwed in lightly and is
then glued (Loctite)). Screws
may not be completely tight-
ened otherwise the ease of
running of the Mini-Max mech-
anism is no longer guaranteed.
3. Clean and spray this frictional
surface. „Penetrating oil" similar
to Top 2000 from Autol.
4. Check the safety plate for dam-
age and exchange if required.
Check all fastening screws and anchors with a torque wrench.
Fastening class 8.8
0.08* 0.12** 0.14***
M8 17.9 23.1 25.3
M10 36 46 51
M12 61 80 87
M16 147 194 214
M20 297 391 430
M24 512 675 743
Fastening class 10.9
0.08* 0.12** 0.14***
M8 26.2 34
M10 53 68 75
M12 90 117 128
M16 216 285 314
M20 423 557 615
M24 730 960 1060
* Lubricated slide friction number 0.8 MoS2
** Lightly oiled slide friction number 0.12
*** Ensured slide friction number 0.14 screw with micro-encapsulated plastic
All weld seams must have a visual inspection. Stop the system and
contact the manufacturer if there are cracks or breaks in weld seams
of the lift.
Maintenance plan
37.2
91