Anleitung_RT_HA_2000_E_SPK7:_
1. Key to symbols
"CAUTION - Read the operating instructions to reduce the risk of inquiry"
The nozzle outlet must be kept a minimum distance of 7 cm from the workpiece you are working
on or the accumulating air may cause damage to the appliance.
7 cm
Indicators on the display
Arrows flash; Temperature is set
Arrows are constantly lit up; Temperature is reached.
Air flow (Settings 1-5)
Switch the hot air pistol off.
Hot air pistol is overloaded.
Overheated hot air pistol (Fault)
Error for faults which are not observed (e.g. overheated hot air pistol)
25.04.2012
15:04 Uhr
Seite 9
GB
9