Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. Hold SHIFT button and then briefly press preset number (5-8) to select the desired preset number,
and the current frequency stored in the preset location will be displayed.
3. If nothing is currently stored in the location, "Preset Empty" will appear on the display.
Specifications
POWER SUPPLY:
Adaptor: 7.5V 600mA (
Battery: 6x1.5V (AA/LR6)
Receiver Bands:
DAB sensitivity:
DAB Adjacent Channel Rejection: -30dB or better
DAB audio decode: 64kbps - 384kbps
Power Output (at 10% THD): 1W RMS
Headphones Socket: 3.5mm diameter.
Speakers: 50mm
Dimensions (W x H x D):
Power consumption :
Specifications are subject to change and improvement at any time without notice.
Important notice:
In case of malfunction due to electrostatic discharge, reset the apparatus by disconnecting from the
mains supply.
Disconnect from the mains, remove the batteries and leave to stand for a few minutes.
Replace the batteries or re-connect to the mains supply.
Electrostatic discharge
In case of malfunction due to electrostatic discharge just reset the micro system (reconnection of
power may be required) to resume normal operation.
)
+
DAB/DAB
Band III: 174.928 MHz (5A) – 239.200MHz (13F)
Tuning Range - 11B to 12D local scan, 5A to 13F full scan
FM Range 87.5-108 MHz
-98dBm or better
18.5 x 11 x 4.5 cm
4.5W
Page 9
Publicité
Table des Matières
