Maintenance - benza LIP25 Mode D'emploi

ENGLISH

4. MAINTENANCE

1. Solar-cell panel: carefully wipe the dust of the surface, to make sure the panel can
absorb the sun-rays fully.
2. Please confirm the battery is full before you use the electric pruning shears.
3. When you don't use this machine for a long time, please charge fully before using
again, as the battery will self-discharge on its own.
Cutter: Replacements, assembles, lubrications, sharpen
WARNING!
• Replacement (Figure 15 - 18)
1. Loosen the up cover of wheel gear with a Philip s head screwdriver (figure15).
2. Loosen the nut of cutter with wrench (figure 16).
3. Dismount the nut connecting the wheel gear with the blade (figure 17).
4. Replace the parts needed (figure 18).
Figure 15
1. Please confirm power is closed before replacement,
assembly, lubrication and sharpening.
2. Please open the cutter when you do the step of lubrication
and sharpen, and the power is off.
Figure 16 Figure 17
6
Figure 18